Why Are My LED Lights Different Colors

LED (Light Emitting Diodes) lights gained popularity due to their brighter luminosity at lower energy consumption and their longevity. Also, LED  lights come with a variety of color choices compared to traditional lights. But sometimes you may wonder ‘Why Are My Led Lights Different Colors’ as you start to notice that the color of your LED lights changes over the course of time. They may either start to fade away or turn yellow.

Why Are My LED Lights Different Colors

Sometimes you may see totally different colors due to malfunctions. There are quite a few reasons behind such phenomena. And there are ways to resolve this as well. So stay tuned, in today’s article, we will discuss everything you need to know about this issue and how you can solve this.

Why Does It Happen?

There are a few reasons, that can cause the color of your LED lights to change or fade over time. Some of them are briefly discussed below-

Color Temperature

LED strip lights can lose their color temperature over the course of time. especially if they were bought from an unauthorized vendor at a cheap price. Losing color temperature can make your LED lights generate a yellowish hue.

Color Temperature Scale

Lack of Vibrancy

Lack of vibrancy is another reason why the light of LED can change over time This problem can be caused over the span of time by frequent voltage fluctuation, insufficient power supply, and cheap LED light materials.


If you are wondering ‘Why Are My Led Lights Different Colors’, then this is the prime and most common reason for that. Again, this occurrence can be caused if the LED is produced from cheap materials and there are no rooms for air ventilation. Also, if the chips are blocked by some foreign objects, they can cause LED strip lights to overheat and cause the diodes to change color. 

Paint In Circuits

If you install LED lights on a surface that is about to be painted or currently being painted, then it can contribute to the change of your LED light as well. The diode will generate light that seems dim, faded, or even an entirely another hue if even the smallest drop of paint touches it.

One of the worst consequences of painting your strip light is that some paint may end up in the wire or circuitry. In this situation, it may fully short out or harm the strip, causing it to flicker, have strange color changes, or just cease functioning altogether.

Lack of Air Ventilation

Poor air circulation around the lighting setup is one of the main reasons for color change. There isn’t enough room for colder air to circulate and carry away heated air. Lack of cooling causes LED strip lights to overheat and cause the diodes to change color.


Higher-quality manufacturers take into account any flaw that might affect the long-term performance of their lights. However, some manufacturers might create strips that are only useful for a short while. Unfortunately, people frequently choose mid-range LED devices, which for a variety of reasons rapidly degrade. So if you are still wondering ‘Why Are My Led Lights Different Colors’- this might be the reason.

Quality Is Important For LED Lifetime

Voltage Drop

The problem might also be in the power supply. Voltage drops may cause your LED’s color to fluctuate as you move down the strip; eventually, there won’t be nearly enough voltage to power each LED to turn it on. If there are several led strips, consider giving them each its own power source.

Covered by Foreign Objects

Just like paints, your LED lights can get covered by some foreign objects. Dust layers and stains are generally the culprits. So make sure to keep your LED lights clean.

Half Of The LEDs Are Not Functional

Your LEDs may cause problems if they were all functioning normally before half of them abruptly stopped. It’s possible that the strip has a broken or damaged connection that needs to be found. An entire area of the light can malfunction because of one broken chip. Overheating, which was previously mentioned and is the most frequent problem, might cause this issue.

How To Fix Different LED Light Colors

Cheap and poor quality materials, how you wire the LEDs, the power supply, voltage, wrong connections, poor soldering- all of these can cause your LED lights’ color to change. If you are already facing the issue of different LED lights color, then here are some of the quick ways to fix these problems-

Step- 1: First of all, make sure the LED lights have a proper voltage supply and that all of their components are linked securely.

Step- 2: After that, you need to shut down the system once.

Step- 3: Take a look at your remote controller and look for a button that says FADE7. If you find that, press that.

Step- 4: Now you can restart the LED lights.

Step- 5: Press the color buttons on the remote control sequentially after turning it on. The LED lights will shift back to their original state or color, as it is supposed to.

Step- 6: Make sure there is enough room for Ventilation. A good ventilation system aids in preventing overheating of the LED light strips, which in turn preserves the diodes’ original color.

Step- 7: If there are stains or layers of dust over your LED, clean them with a soft piece of cloth. Make sure dust does not pile over them over the course of time. 

The best course of action would be to replace your LEDs if the color of your LED still doesn’t appear to return to its previous state. Better if you have a warranty card on hand. To avoid such issues, be sure to get high-quality LED lights when making your next purchase.

How To Fix LED Lights That Are Two Different Colors

If you see two different colors of light when you switch on your LED, then you can ensure the following things are ok with your LED. Hopefully, you won’t have to worry about ‘Why Are My Led Lights Different Colors’ anymore –

1. Inspect that Everything Is Connected Properly

The most frequent cause of this problem, out of all the possibilities, is that your LED lights could not have been plugged in properly. Fortunately, this is a rather simple issue to resolve. Simply check to see that the black wire on your RGB strip connection is on the same side as the +12V at first.

Make Sure Everything Is Connected Properly

Next, check to see that the connector’s + end is perfectly aligned with the strip’s positive side. Make sure your R, G, and B wires are connected properly while you are at them. Users have occasionally noted that their cables were formerly incorrectly labeled. Unfortunately, the only thing you can do in such a situation is fiddle with the cords until you discover the secret combination that restores everything to normal operation.

2. Make a Reset

For the majority of you, the previous step will have been successful, but if it wasn’t, go on with this step. You’d be astonished at the power of a simple reset, even if this repair may seem too easy to be effective. You only need to reset the controller and the lights to complete this remedy.

This restores everything to its factory default settings, which were in place when it left the manufacturer. Your settings may change over time, which might result in faulty lighting. The simplest approach to undo such modifications and get rid of any flaws that may have gradually crept in is to reset.

Make A Reset If Needed

There are just too many different brands and models, each with a unique set of settings. However, it appears that there is a specific reset button for you to push in almost every situation. If not, there is usually a method that entails pressing and holding the power button for a while. To save any more guessing if neither of these solutions works, it could be a good idea to search for the manufacturer information online or check the user manual that came with your lights.

3. Using A Dimmer

Another choice is to use a dimmer to prevent having to continuously adjust or replace your LED light bulbs. By doing this, you’ll be able to regulate the brightness of your lights and stop them from gradually decreasing too much. Dimmers are reasonably priced and are available at most hardware stores. You can maintain your LED lights’ brightness and beauty for many years by simply installing one in your light fixture.

Kasa Outdoor Smart Dimmer Plug

IP64 Plug-in Dimmer for Outdoor String Lights, Compatible with Alexa, Google Assistant & SmartThings, Long Wi-Fi Range 2.4Ghz, No Hub Required.

4. Changing the Controller and Led Strip

If the solutions mentioned above didn’t work and you are still wondering ‘Why Are My Led Lights Different Colors’, it’s likely that either your LED strip or the controller has a problem. Unfortunately, there really is no way to avoid this at a reasonable price, so your best choice is to replace one or both of these parts. You could try operating your LED strip using a different controller to highlight the problem. You will certainly need to replace your LED strip if this doesn’t work.

5. Adjust The Bulbs

You might need to try adjusting your LED light bulbs if merely changing them does not resolve the problem. To do this, you might need to turn them in your light fixture so that they all face the same way or trim off any protrusions or irregularities from the bulbs themselves.

These are all you need to keep in mind if you ever have doubts about Why Are My Led Lights Different Colors?

Frequently Asked Question

Why Does My Lighting Look Yellow?

Because of how light bounces off the things in the room over time, the lighting fixtures may begin to lose their color. Yellow is one of the hues that is frequently influenced by this and can result in color distortion. In addition, certain light bulbs release sunlight that is warmer than usual, which can also alter the hues. When selecting the appropriate style of lighting for your space, all of these elements must be taken into account.

Why Are My Led Lights Different Colors?

You may be doing a couple of things incorrectly if your LED lights are of various colors. If you notice that the colors of your LED strip lights are changing, do the following actions to correct it:u003cbru003eu003cstrongu003e1.u003c/strongu003e See if you have a reliable ventilation system for the LED light strip or bulb to cool down and avoid the diodes from overheating.u003cbru003eu003cstrongu003e2.u003c/strongu003e Ensure that each LED component is connected properly.u003cbru003eu003cstrongu003e3.u003c/strongu003e To repair LED lights that are various colors, follow the instructions provided above under the ‘How To Fix Different LED Light Colors’ sectionu003cbru003eu003cstrongu003e4.u003c/strongu003e Verify all of the soldering and connections.

How Do You Fix Discolored Led Light Strips?

Most likely, your LEDs are overheating. The issue has an easy fix. Avoid exposing them to extreme heat! To ensure that there is adequate cool air inside, a robust ventilation system is crucial. In this manner, there is no possibility of diode overheating, and your LED light strips won’t change color or get discolored.

Why do my red LED lights look orange?

A RED LED will appear orange if too much electricity is allowed to flow through it.

Final Words

Though LED strips are a fantastic and reasonably priced method to give your living spaces a little more personality and charm, they aren’t exactly immune to flaws. The best thing to do is to replace everything if you have tried all of these techniques without much result.

Having said that, we are constantly conscious that some of you out there will have discovered fresh and very inventive solutions to the issue. If you fall into this category, please share all of your strategies in the comments area below for the following LED users who are still wondering ‘Why Are My Led Lights Different Colors’.

Related Articles…

What Is the Best LED Color for Gaming

Can You Put Led Lights on Wood

Can You Use LED Strip Lights to Grow Plants

How to Keep LED Lights from Falling

Can LED Lights Be Left On 24/7